LithiumCure 1000

LithiumCure 1000

SINAK LithiumCure 1000™ is a ready to use, zero VOC Curing Agent for use on exterior open-surface pavements and colored concrete.

SINAK Lithium Cure™ 1000 is the most significant advancement in concrete curing over the past 50 years. SINAK’s lithium technology outperforms all other curing products and methods. Lithium Cure™ 1000 minimizes or eliminates plastic shrinkage cracking in freshly placed concrete, and produces highly durable surfaces for pavements, bridge decks and precast elements.

LithiumCure 2000

LithiumCure 2000

SINAK LithiumCure 2000™ is a ready to use, zero VOC Curing Agent for use on hard steel trowelled finished concrete.

SINAK Lithium Cure 2000™ is formulated to meet or exceed the performance requirements of concrete water cure specifications. Use of Lithium Cure 2000™ assures that the specified design strengths will be achieved along with development of improved surface durability properties and reduced permeability. Lithium Cure 2000™ is excellent for use on horizontal steel trowel finished concrete that will receive polish, clear sealer(s) or remain in a natural state.

S-102

S-102

SINAK S-102™ is a ready-to-use, NO-VOC concrete cure that outperforms all traditional wet-cure methods.

SINAK S-102™ is a ready-to-use, NO-VOC concrete cure that outperforms all traditional wet-cure methods such as blankets, plastic sheeting, fogging, steam curing, etc. while eliminating the construction delays caused by water curing. S-102™ is the only concrete curing method proven to prevent cure related cracking and crazing, while minimizing or eliminating early-age differential shrinkage (slab-curling).

S-102™ is especially effective in hot, windy and low humidity environments. S-102™ does not interfere with the bonding of joint sealants, patching, surface coating materials, paints, lane markers or cement wash treatments. Overspray on reinforcement steel, does not require removal.

Advantages of using S-102 instead of water for curing:

  • Retains high relative humidity providing optimal hydration for continued curing without monitoring of the surface
  • Used as evaporation control and a finishing aide
  • Immediate slab access. Method of curing is done in one day
  • Method of curing is done in one day
  • Zero waste

Advantages of using S-102 instead of a film-forming cure:

  • Testing of S-102 is comparable to 14 day full-soak water-curing
  • Higher spread-rate
  • Non film-forming
  • Penetrating cure that cannot be removed
  • Compatible with all topically applied materials without extra preparation
  • Zero waste